Connect with us

Tech

Trench collapses kill 13 workers so far in 2022

Published

on

Editor’s note: This story was updated June 21, 2022, following the death of two workers in a trench after the publication of this story, bringing the total deaths to 13 so far in 2022.

This year has been a tragic one for 13 workers killed in trench collapses.

The deaths between January 1 and June 17 include three double-fatalities in recent trench collapses in Florida, Michigan and Minnesota. Fatal cave-ins were also reported in Idaho, Tennessee, Nevada, Indiana, Hawaii and Mississippi. Florida also had a second fatal collapse this year.

In comparison, 11 workers reportedly died during the same period in 2021, and 12 workers in 2020, according to data compiled by Equipment World from media reports and online searches of U.S. Occupational Safety & Health Administration investigations.

Using data compiled in our search, along with numbers cited by OSHA and the U.S. Bureau of Labor & Statistics, there have been 248 trench-collapse deaths between 2011 and June 17, 2022. An average of 20 workers died in trenches each year between 2011 and 2021, according to our findings.

Those numbers include:

  • 25 trench-collapse deaths in 2020, and at least 20 trench fatalities in 2021 that our search turned up.
  • 24 trenching and excavation deaths in 2019, according to OSHA.
  • 166 trench-collapse deaths between 2011 and 2018, according to the BLS.

How they died

As we head into the national Trench Safety Stand Down, from June 20-24, we take a look at deadly trench collapses so far this year:

(Related Content: Safety Stand Down: How to Prevent Death by Trench Collapse)

June 17: Two workers in a trench in St. Paul, Minnesota, died after being buried in a cave-in. Their bodies were recovered after a 12-hour operation by emergency responders. The victims have been identified as Jeff Jeanetta and Robert Brandtjen, according to Fox 9 news station. The station reports that the workers were about 7 feet underground working on a drain as part of a utility line project when the cave-in occurred.

May 9: Two workers were killed after a utility trench collapsed at a construction site near Burnt Store Road in Punta Gorda, Florida. Marcos Santiz-Lopez, 41, and Brandon M. Colburn, 25, were installing a water pipe in the 8-foot-deep trench when it collapsed. The men worked for Guymann Construction of Cape Coral, Florida. OSHA is investigating. 

April 29: Two brothers died in a 14-foot-deep trench they were digging for drainage for a pole barn in Lowell Township, Michigan. Pete Bencker, 59, and Ron Bencker, 68, both died in the cave-in. Pete Bencker had also retired a year ago as a volunteer firefighter. He was the owner of Bencker Construction LLC. Ron Bencker worked as a truck driver for a furniture business. Michigan OSHA is investigating.

April 21: One man died and another was injured when a trench for a power line collapsed in Canyan County, Idaho. Noah M. Brien, 23, of Oregon was buried in the cave-in and died. A 22-year-old man was injured and taken to the hospital. OSHA is investigating. Its online investigation search lists Jess Zitlau of Boise, Idaho.

April 17: A worker’s body was recovered after 10 hours of being buried in a trench collapse in Spring City, Tennessee. Armando Saldana Lemus was employed with a subcontractor on a residential project when the cave-in occurred. Tennessee’s OSHA is investigating.

March 31: The body of a 32-year-old worker was recovered after a 5-hour operation at the site of a trench collapse in Las Vegas. Rigoberto Canas Ramos died of suffocation and mechanical asphyxiation. The online OSHA investigation lists Kb Home Las Vegas Inc.

February 22: A project supervisor on a construction site in Shelby County, Indiana, fell into a 40-foot-deep excavation. He was standing near the edge of the 6-foot-wide hole when the ground collapsed. Timothy Harness, 54, fell in and was buried. Several workers jumped in to try to rescue him, but were unsuccessful, according to news reports. He was found about 19 feet deep into the trench, and rescue workers had difficulty removing him due to water continuing to fill the hole and compressing the clay, according to a report by Fox 59 news channel. Online OSHA records indicate the case is closed and no citation issued.

February 3: A worker on a bridge and road widening project on U.S. 441 in Lady Lake, Florida, died in a trench collapse. It took 10 hours to recover the body of 27-year-old John Terranova who worked for Maylor Foundation Contractors of Tampa. OSHA is investigating

January 29: A worker on a sewer project in Honolulu, Hawaii, died when a trench collapsed. Trevor Alvarado, 23, was reportedly removed from the trench by a bystander who administered CPR until police and rescue personnel arrived. He died at the hospital. Peterson Bros Construction Inc. of Waianae faces proposed penalties of $65,259, according to OSHA. The violations listed by Hawaii OSHA include no cave-in protection, failure to provide training for workers to recognize jobsite hazards, not providing a safe exit from the trench, no trench inspection by a competent person and failure to remove employees from the hazard. 

January 11: A worker died in Jackson, Mississippi, when he was buried under 20 feet of dirt in a trench after the ground beneath him collapsed. Matthew Miller, 33, died of asphyxiation. Miller worked for MCA Construction. OSHA is investigating.

Tech

Cat’s Next Generation 255 and 265 Get More Power, Lift Height

Published

on

By

Caterpillar is bidding farewell to its 259D3, 279D3 and 289D3 compact track loaders with the introduction of its new, next-generation 255 and 266 models.

The completely redesigned models debuted at media and customer events at Caterpillar’s Edwards, Illinois, Demonstration and Learning Center last week. The 255 and 265 offer improved engine performance, more lift height, a roomier cab and more standard technology than their predecessors.

“We kept the DNA of the D3 series while reimagining the possibilities of loader performance using voice of customer feedback to lead the way,” says Trevor Chase, product application specialist for Caterpillar. “Both next-generation models leverage the many benefits offered by the vertical lift design. The new Cat 255 replaces the 259D3, while the 265 replaces both the 279D3 and 289D3 machines.”

The CTLs are the last of Cat’s building and construction products to get the next-generation treatment and simplified nomenclature. The first number (2) represents the skid steer loader and compact track loader machine family; the middle number (5 or 6) designates the machine size; and the ending number (5) is the compact track loader identifier. Skid steers will be identified by a 0 end number. Additional new models will roll out in the coming months, the company says.

Caterpillar 265 compact track loader carrying a blockCaterpillarMore power and torque

Cat equipped the 255 with a C2.8T engine and the 265 with a C2.8TA engine, both at 74 horsepower. This gives the new machines a significant boost in torque – 13% for the 255 and 43% for the 256 – over their D3-Series predecessors. The engine and cooling package are mounted lower in the frame for added visibility out the rear window and stability while lifting heavy loads.

Customers attest that the added lift height makes truck loading easier. The 255 offers 10 feet 4 inches of lift height, while the 265 can reach 11 feet high.

“The lift height has made a big difference when loading trucks,” said Derrick Roger, owner of Coast to Coast Lawnscapes, who spent several months testing the 255. “You can get on top of that truck now and empty the bucket; whereas, before you would have to shake the bucket to try to get the material to fall out.”

The 255 delivers 36% more tilt breakout, 26% higher lift breakout force and a 24% increase in rated operating capacity (ROC). The 265 also delivers 19% higher tilt breakout force and 22% higher lift breakout force.

Standard hydraulic pressure has been increased to 3,500 psi, allowing the 255 and 265 to operate all Cat Smart Attachments with the standard auxiliary hydraulics provided.

If demanding attachments require additional hydraulic flow, customers can have their Cat dealer activate the high flow functionality on the machine or remotely via software update. This makes it possible for the CTLs to hit 30 gallons per minute of flow at the standard system pressure.

A High Flow XPS factory option increases auxiliary hydraulic system pressure to 4,061 psi for both models, while also increasing the hydraulic flow to 30 gallons per minute for the 255 and 34 gallons per minute for the 265.

The torsion suspension undercarriage delivers better operator comfort, track wear and material retention, plus the stiffer design results in smoother graded surfaces, Cat says. A new 12.6-inch bar-tread narrow track option is available on the 255.

A more spacious cab

Cat says it has increased the cab width by 2.75 inches without making the machines wider and the footwell-to-ceiling height by 1.8 inches. The larger cab gives operators an additional 1.5 inches of hip room and 1.1 inches more width between the joysticks.

A range of new mechanical and air-ride suspension seat options are available, including a ventilated and heated seat. A new automatic temperature control allows operators to set a specific temperature. Relocated vents help cool or heat the machine quickly.

The standard package includes the same 5-inch LCD monitor as the D3 Series CTLs, which offers Bluetooth connectivity and functionality for the rearview camera feed, creep, job clock, and maintenance reminders.

Customers can upgrade to a new 8-inch advanced touchscreen monitor, like the display found in Cat’s next-generation mini excavators and small loaders. It delivers advanced radio control and supports the 270-degree multicamera option. The advanced monitor pairs with the advanced joysticks for integrated control of all machine functions and adjustments.

“You can adjust the movement – or the aggressiveness or the conservativeness – of how your tracks and lift arms work through your advanced touchscreen display,” Dante Thomas, skid steer and CTL marketing manager, said. “And you can control of all of your display functions from the advanced joysticks. There are buttons with enter and select functions on those joysticks that you’re able to change any functionality that is possible.”

Cat also redesigned the entry, making the 255 and 265 easier to enter and exit. The cab door can be opened even when the lift arms are not fully lowered to the frame stops. It can be removed without tools in less than one minute.

Advanced technologies

Calling the 255 and 265 “one of the most attachment-friendly machines on the market,” Thomas says both the standard and advanced monitors can run Cat Smart Attachments, such as the dozer and grader blades and backhoe.

“It has attachment recognition that when you plug the attachment into the machine, it recognizes which attachment is connected. It adjusts your joystick pattern, so it gives you intuitive and simple control,” says Thomas.

The available Cat Product Link Elite system tracks machine hours, location, asset utilization, provides fault code details and delivers advanced monitoring and machine health, that is remotely accessible via VisionLink. In addition, Product Link Elite provides remote flash and troubleshooting capabilities and quickly enables the remote activation of the SEA High Flow feature.

[embedded content]

Continue Reading

Tech

Quick Data: 2023 Top-Selling Wheel Loaders and Auction Trends

Published

on

By

Quick Data is a snapshot of new and used wheel loader sales trends from Randall Reilly’s EDA equipment financing data, TopBid auction price service and EquipmentWatch market trend reports.

Demand for wheel loaders has softened with new and used financed wheel loader sales down year-over-year from August 1, 2022 to July 31, 2023 according to Randall Reilly’s EDA equipment financing data.

Financed new wheel loader sales dropped 10%, while used financed wheel loader sales fell by 15% compared to the same period last year.

Cat (22.4%), Deere (21.0%) and Komatsu (12.4%) held their positions year-over-year as the top three sellers of new financed wheel loaders. Top models sold included the Deere 544 P-Tier (401), Deere 624 P-Tier (380) and the Komatsu WA270-8 (364).

[Watch: “A Really Solid Machine” – Test Run of Komatsu’s WA475-10 Wheel Loader]

Cat (28.5%) and Deere (22.9%) also snagged the No. 1 and 2 positions for the highest number of financed used units sold, with Case (14.7%) claiming the third spot. On the date we examined the data, the top-selling models were the Case 321F (340), Cat 926M (164) and the Case 621G (159). 

During this period, there were more buyers of new loaders in Florida (955) than in any other state. Buyers of new wheel loaders were also prevalent in Texas (893) and Illinois (665). Those states were also top buyers of used financed machines, with 712 units sold in Texas, 413 in Florida, and 412 in Illinois.

EDA data is compiled from state UCC-1 filings on financed construction equipment. EDA continually updates this data as information comes in from each state.

[Related Content: A Rundown of the Latest Wheel Loaders for 2023]

Used Wheel Loader Market

Used wheel loader prices rose 10.1% for the 12-month period from August 1, 2022 to July 31, 2023, according to Randall Reilly’s EquipmentWatch market trend data.

The average price for a used wheel loader was $137,465 in July 2022 compared to $151,367 in July 2023. The average age of used wheel loaders fell slightly during the period, dropping from 8.8 years to 8.3 years.

EquipmentWatch Used wheel loader price and age chartEquipmentWatchThe average age and price were calculated on 153,356 resale listings during the period in the EquipmentWatch database.

Over the last 12 months, prices for used wheel loaders have in general increased, with the largest gains in October 2022 (6.5%) and February 2023 (2.9%).

EquipmentWatch defines fair market value (FMV) as the monetary value of an asset that can be expected in a transaction with a single seller and single buyer, neither of whom is under any compulsion or time restriction to complete the transaction. FMV for heavy equipment is most closely associated with the private resale market, as opposed to the public auction market.

Wheel Loader Auction Prices

Caterpillar also dominated the auction charts, accounting for 18 of the top 20 wheel loaders sold in terms of price for the 12-month period of September 1, 2022 to August 31, 2023. Deere and Komatsu were the only other manufacturers to appear on the list.

The top auction price spot went to a 2021 Cat 966M with 2,188 hours. It sold for $400,000 at a Ritchie Bros. auction in Orlando, Fla., on September 21, 2022. The second-highest price paid was $315,000 for a 2019 Cat 980M with 7,836 hours at another Ritchie Bros. sale in Atlanta, on December 1, 2022. Rounding out the top three was a 2018 Deere 944K with 8,941 hours. It sold for $290,00 at a J.M. Wood Auction Co. sale in Montgomery, Ala., on March 21, 2023.

In total, there were 358 wheel loaders sold at auctions tracked by Top Bid during this time, with an average price of $99,747. (This does not include any units sold for less than $5,000.)

EDA, Top Bid and EquipmentWatch are owned by Randall Reilly, parent of Equipment World.

[Related Content: Heavy Equipment Auctions Set for Second Half of 2023

Continue Reading

Tech

Video: A closer look at Rokbak articulated dump trucks

Published

on

By

Volvo Construction Equipment bought Terex’s off-road truck line in 2014, and six years later, it rebranded its articulated haulers under the Rokbak name.

On this episode of The Dirt, we hear from Paul Douglas, Volvo vice president of rigid haulers, who explains the differences between the old Terex line and the Rokbak trucks. He also gives a hint at some of the new things coming from Rokbak, including redesigned cabs and replacing the current trucks with new models. There’s also the possibility of a new size truck to hit the market.

Rokbak, as with other construction equipment brands, is working toward a zero-emissions future. On this episode, he explains where the articulated dump truck market is heading in terms of alternative fuel. He adds that customers will see big changes in emissions and engines in the next five years, with the ultimate goal of reaching zero emissions within 10 years.

So to learn more about Rokbak and what the brand has in store for the future, check out this episode of The Dirt.  

Equipment World serves up weekly videos on the latest in construction equipment, work trucks and pickup trucks – everything contractors need to get their work done. Subscribe and visit us at equipmentworld.com!

In This Episode:

  • 00:00 – Rokbak Articulated Haulers
  • 00:30 – Is Rokbak More Reliable Than Terex?
  • 03:22 – Brand New Cab
  • 06:10 – More Changes to Upcoming Rokbak Trucks
  • 09:20 – What Will Rokbak Do in the Next 2-5 Years?
  • 11:24 – What Alternative Fuel Will Rokbak Haulers Use in the Future?
  • 14:53 – Final Thoughts

Continue Reading

Trending

Copyright © 2022 topbuildhomes.co.uk